Return to the homepage

BRITAINS LEADING PHOTOLUMINESCENT SAFETY PRODUCT MANUFACTURER

View our range of photoluminescent products

Datasheet : Glo Brite A85/FL Fluorescent/Photoluminescent Coloured Coatings range

Return to main photoluminescent coatings page
Description :
One component Water Based Thixotropic Photoluminescent safety coating.
Recommended use :
To be used in conjunction with Glo Brite Primer A base coat (order no C10) and Glo Brite protection lacquer WR surface coat (order no C30).

Internal: Wood, concrete, metal and brickwork
External: Wood, concrete and brickwork
Physical constants :
Flash point Nil
Finish Flat
Colour Yellow, Red, Blue, Orange or Green
Solids by volume 40%
Specific gravity 1.4 kg/litre
Practical spreading rate 4 square metres per litre
Drying time 2 hours at 20 degrees C / 68 degrees F
Recoating time Approximately 2 hours
Shelf life 1 year in dry place above 5 degrees C
Application details :
Conventional spray 1 coat @ 200 microns WFT
Brush 1 coat @ 150 microns WFT
Roller 1 coat @ 150 microns WFT
For best results it is recommended that 2 coats be applied when using brush or roller.
Surfaces to be clean and dry with temperatures above dew point to avoid condensation. When measurement of wet film is not possible, dry film should look even and opaque.
Spraying thinning :
Up to 10% fresh clean water can be used for thinning. Apply several thin coats, allowing 60 mins. between coats.
Note: Equipment should be cleaned immediately after use with clean water. Recommended air pressure for conventional spraying 30 psi.
Surface preparation :
All surfaces must be sound and free from oil, grease, dust and powder.
Health & Safety precautions :
A85 presents no fire or toxicity hazard. Accidental splashes on the skin or in the eyes should be removed at once with fresh clean water.
Return to main photoluminescent coatings page
About us
Contact us



Glo Brite Photoluminescent, 630 Woodbridge Road, Ipswich, Suffolk, IP4 4PG, England
Tel : (01473) 721561  -  Fax : (01473) 714069  -  Email : sales@globriteint.com
http://www.globriteint.com  -  VAT no: 171 1934 18  -  Copyright © 2018 Glo Brite Photoluminescent
GLO BRITE Photoluminescent material is manufactured by, and is the tradename of, Glo Brite.
QUICKMENU
Our Products>Self-Adhesive Vinyl(view datasheet)About UsContact Us
Rigid Sheets(view datasheet)Why Photoluminescent?Useful Links
Safety TapeHome
Floor Markers
Paint
Stair Nosing
Paper(view datasheet)