Return to the homepage


View our range of photoluminescent products

Datasheet : Glo Brite protection lacquer WR

Return to main photoluminescent coatings page
Description :
One component weather resistant lacquer with UV filter.
Recommended use :
Protection lacquer for use on top of all Glo Brite safety coatings.
Physical constants :
Flash point Over 32 degrees C
Finish Clear and glossy
Solids by volume 27%
Practical spreading rate 10 square metres per litre
Drying time 2 hours at 20 degrees C / 68 degrees F
Recoating time Approximately 2 hours
Shelf life 1 year in dry place above 5 degrees C
Application details :
Conventional spray/brush 1 coat @ 100 microns WFT
For best results it is recommended that 2 coats be applied when using brush.
Return to main photoluminescent coatings page
About us
Contact us

Glo Brite Photoluminescent, 630 Woodbridge Road, Ipswich, Suffolk, IP4 4PG, England
Tel : (01473) 721561  -  Fax : (01473) 714069  -  Email :  -  VAT no: 171 1934 18  -  Copyright © 2018 Glo Brite Photoluminescent
GLO BRITE Photoluminescent material is manufactured by, and is the tradename of, Glo Brite.
Our Products>Self-Adhesive Vinyl(view datasheet)About UsContact Us
Rigid Sheets(view datasheet)Why Photoluminescent?Useful Links
Safety TapeHome
Floor Markers
Stair Nosing
Paper(view datasheet)